Composite Three-Phase Transformer Box Pads

The "BP" Series box pads are designed to mount three-phase pad-mounted transformers in the 3500 to 14000 pound weight class. The depth provides additional space for cable radius and bending flexibility.

constructed from durable, non-conductive, corrosive resistant fiberglass reinforced polyester structurally enhanced for very high strength-to-weight ratio eye bolts diagonally installed for lifting. Lag holes can be drilled in the field without affecting strength turf-green color is pigmented throughout the laminate for a smooth, pleasing appearance integral stacking forms eliminates the disposal problem with temporary stacking intermediates designed to stack without binding can be delivered to the job site on light utility vehicles and set with light duty winching equipment easily restacked for delivery to division storage or multiple job sites

Key dimensions for the "BP" Series are shown below. Contact us for additional data with complete specifications.

KEY DIMENSIONS (inches) BOX PAD CAT. NO. TOP SURFACE A                B TOP OPENING C                D    HT. H Transformer Weight BP3500 52 52.5 42 15.5 31 3500 BP3500A 70 52.5 60 15.5 31 7000 BP5500 62 55 52 15.5 31 5500 BP5500A-24 90 67 75 20 24 5500 BP7000 72 72 48 18 32 7000 BP7000-15 72 72 48 18 15 7000 BP7000A-18 75 63 60 18 18 7000 BP7000-MTO-1 72 72 48 18 32 10,000 BP7000-MTO-2 72 72 48 18 32 12,000 BP14000-MTO-1 77.5 63 62 21 30 14,000 BP14000-MTO-2 77.5 63 62 21 30 7,000