Composite Switchgear Pad-Vaults

These pad-vaults are designed to accommodate switchgear of leading manufacturers. They are manufactured from durable, non-corrosive, thermoset polyester resin reinforced with fiberglass. Low inorganic filler content (21% by weight) assures durability with minimum structural degradation over time.

Lightweight, easily installed and leveled Easily drilled for switchgear lag bolts or mounting brackets Shaped for easy stacking, storage and shipment Provides ample space under the switchgear for training large cables Gel-coated turf green outside; pigmented turf green inside throughout the composite Top flange and sides are multi-ribbed for high load bearing capacity NEED A DRAWING? Click Here to E-mail your Request or Call us at 731-427-0433

KEY DIMENSIONS (inches) BOX PAD CAT. NO. TOP SURFACE    A          B TOP OPENING C         D HT. K BP2000G-MTO-1 52 37 42 27 32 BPS-7240A-15 72 40 See Drawing below BPS-7240B-15 72 40 See Drawing below SG-5757 57 57 43 43 30 SG-5844 58 44 48 33 30 SG-5844-20 58 44 48 33 20 SG-6270 62 70 51 59 32 SG-6270-20 62 70 51 59 20 SG-6270-24 62 70 51 59 24 SG-6270-36 62 70 51 59 36 SG-6549 65 49 51 39 32 SG-6656 66 56 52 42 32 SG-7240 72 40 52 28 32 SG-7245 72 45 60 33 30 SG-7245A 45 72 33 18 30 SG-7245A-MTO-1 72 45 45 28 31 SG-7245A-MTO-2 72 45 30 33 31 SG-7245A-MTO-3 72 45 60 33 31 SG-7245A-MTO-4 72 45 57 33 31 SG-7245A-MTO-5 72 45 48 33 31 SG-7378 73.5 78 59.5 68 32 SG-7378A-20 73.5 78 55.5 60 20 SG-7467 74 67 64 18 32 SG-7835 78 35 68 25 30 SG-7836 78 36 68 26 30 SG-7957 79 57 65 43 32 SG-7957-MTO-1 79 57 65 34 32 SG-7957-MTO-2 79 57 62 34 32 SG-7957-MTO-3 79 57 62 43 32 SG-8085 80 85 70 75 32 SG-8167 81 67 68 18 32 SG-8559 85 59 71 48 32 SG-8576 85 76 As Needed 32 SG-8576-36-OIL 85 76 19 x 62 19 x 62 36 SG-8587-20-OIL 85.5 87.5 62.75 64.75 20 SG-8590 85 90 75 76 32 SG-8646 86 46 72 17 32 SG-8770 87 70 76 59 32 SG-9049 90 49 76 39 32 SG-9073-OIL 90 73 76 59 32 SG-9654-36 96 54 82 40 36 SG-9680-24-OIL 96 80 21 x 65 21 x 61 24 SG-9873-OIL 98 73 84 59 32 SG-10086-OIL 100.5 86.5 86.5 72.5 32 SG-10467 104 67 94 18 32 SG-10473 104 73 94 18 32 SG-10793-36-OIL 107 93 93 79 36 SG-11276 112 76 As Needed 32 SG-11276-36-OIL 112 76 94 18 36 SG-11276-MTO-1 112 76 96 48 36 SG-12273 122 73 As needed 32 SG-12273-MTO-3 122 73 107 18 32 COVERS: Suffix with "C" - Example: SG-6270-C

Click below to view our S&C Electric Cross Reference Guides:

The BPS-7240A-15 and BPS-7240B-15 are combination box pads designed for a transfer type switch/meter mounted on one end and a single phase padmounted transformer on the other end. Applications include: Backup source with critical applications Offset energy cost at peak loading intervals Allows private power generators (wind, internal combustion, solar, etc.) to switch and meter power with local power company

Note: Dimensions are measured at the intersection of projected adjacent planes.

DIMENSIONS (inches) BOX PAD CAT. NO. TOP SURFACE   A            B TOP OPENING C         D G H J K TOP OPENING L         M UNITS/ PALLET BPS-7240A-15 72 40 8 24 3.5 81 49 15 10 18 10 BPS-7240B-15 72 40 14 24 3.5 81 49 15 6 18 10 COVERS: Suffix with "C" - Example: BPS-7240A-15-C

Click below to view our S&C Electric Cross Reference Guides:

Pad-Vaults for S&C Vista Switchgear Note: Dimensions are measured at the intersection of projected adjacent planes.

DIMENSIONS (inches) BOX PAD CAT. NO. TOP SURFACE   A            B TOP OPENING C         D E F G H J K UNITS/ PALLET SG-10467 104 67 94 18 5 5 4 83 120 32 10 SG-10473 104 73 94 18 5 5 4 89 120 32 10 SG-7245A 72 45 33 18 6 6 4 57 84 30 10 SG-7467 74 67 64 18 5 5 4 83 90 32 10

Click below to view our S&C Electric Cross Reference Guides:

To Top